|
|
| WALLIES APPLICATION : |
|
| |
|
Wallies Application Video |
| 1. Clean the surface where wallies are to be applied with a soft cloth and water. |
 |
 |
| |
| 2. Use the round stickers supplied in the pack to position the wallies and check your placement |
|
 |
| |
| 3. When you are ready to apply the cutouts, simply place in water, fully submerged, and soak for one to two minutes. |
|
 |
| |
| 4. Remove the cutout from the water, draining off any excess water. |
|
 |
| |
| 5. Using a sponge or paper towel, smooth on each piece, wiping from the center out toward the edges to eliminate any trapped air bubbles. |
|
 |
| |
| 6. Continue with this same procedure until your Wallies project is complete. |
|
 |
| |
|
|
|
|
|
| |
|
