| 1. Flatten your sticker- After having removed the design from the packaging, unfold it and keep it flat for 24 hours |
 |
| 2. Allow your sticker to acclimatize to the room |
| |
| 3. Clean the surface |
 |
| 4. Dry the Surface |
 |
| 5. Test your surface with an offcut of the sheet or the miniature design |
| |
| 6. Separate the different parts of the design (not required if it's a small design) |
 |
| 7. Display on the surface to get a first look |
 |
| 8. Slowly open a part of the design from its prop and apply it on the surface |
 |
| 9. Once a side of the design is properly applied on the surface, slowly apply the rest of the prop. Avoid making any folds while separating the design from the prop. |
 |
| 10. Smoothen out any bubbles if any with a soft cloth |
 |
| Reposition the design and change the decoration as often as you want! |
| |
| |
